Description
Although designated as a home cinema product, this superb combination can be used in any application where a pair of MiniQuake transducers are required for maximum effect. Ideal for two or three seater sofas or can be used in individual seats if preferred.
The super-smooth response of the MiniQuake is complimented by the versatile XJ-300ST amplifier to enhance the whole cinema experience.
A set of four RI-4 rubber isolators are also included so that you get the very best out of your installation.
Please note: Speaker cable is not supplied with this product.
Box Contents
Earthquake XJ300ST Amplifier
2 x Earthquake MiniQuake Transducers
2 x Right-angle mounting brackets for MQB-1 transducers
Set of four RI-4 Rubber Isolators.
Installation Guide
Technical Information
XJ-300ST Amplifier: | |
Frequency Response: | 20Hz – 20kHz |
Power Output: | 2 X 110 WRMS (8 ohm Stereo) |
2 x 170 WRMS (4 ohm Stereo) | |
170 WRMS (8 ohm Mono Bridged) | |
300 WRMS (4 ohm Mono Bridged) | |
Signal To Noise Ratio: | >97dB |
Load Impedance: | 4 ohms or greater |
Crossover: | 50Hz -160Hz |
High Pass Filter: | 15 HZ |
Phase infinitely variable: | 0 to 180 degrees |
THD: | 0.08% |
Damping Factor: | >1400 |
Input Impedance: | 10Kohm |
Power Line Voltage: | 110-220~AC 50/60Hz |
Dimensions: | 21.59 cm (W) x 20.32 cm (D) x 4.76 cm (H) |
Weight: | 1.7 kg |
Finish: | Flat Black |
Earthquake MiniQuake (MQB-1): | |
Power handling: | Up to 300 Watts |
Nominal Impedance: | 8 ohms |
Frequency response: | 15 to 200Hz |
Dimensions: | 9cm x 8cm |
Weight: | 1.5kg |
Reviews
There are no reviews yet.