Buttkicker Gamer Review – Final rating 5 out of 5
If you are one of those people who crank up the music in your car until random parts start rattling, or like to go to arcades just because the driver’s seat rumbles and reacts when you crash into something, then there is a new product on the market that you are definitely going to enjoy. It’s called the “ButtKicker Gamer”. Now, at first this may sound painful, but think of it has one huge rumble pack that is mounted right under your butt. The device is made to clamp around the metal pole in ordinary computer chairs and when hooked up to a game system, PC, or audio player, it unleashes a series amount of amperage on your a***.
The ButtKicker Gamer retail package contains two main modules, and seven different cords that have a number of connections. Setting this bad boy up can be very confusing if you don’t read the instructions or really know what you are doing. On the other hand, the seven different cords allow for almost any setup and you can hook the ButtKicker up to almost anything that outputs audio. You can setup the ButtKicker Gamer with your Xbox, or any other game console, PC, MP3 Player, CD player, Stereo, and virtually anything else that has an auto output. After you have the right wires in the right places, you will then have to attach the ButtKicker to the bottom of your computer chair.
Hooking up the ButtKicker (BK) to an Xbox is fairly easy, but will take some time to get everything in the right places. The first thing that you will need to do is setup the “Gamer Amplifier”. This amplifier requires power, an audio input, and the output that goes to the BK underneath your seat. The amplifier also has a number of controls on the front that you will be able to mess with once everything is setup. The video input will come from your Xbox AV cable. If your TV uses the red AV plug (most do) then you will need to add another cord into the mix called the mini Y adapter. This allows the red audio cord to go into both the TV and the BK. Once the cord goes through the Y adapter it will need to go through the “Ground Loop Isolator”. This keeps possible amplifier interference from entering the system and basically to keep everything safe should something go wrong electronically or if there is a surge. Once this is hooked up, you can plug the other end of the isolator into the back of the amplifier. The next thing to do is to setup the output that goes into the actual BK. This is the simple part. The BK has a cord attached to it that will need to attach to an extension cord that plugs into the back of the amplifier. The extension cord is quite lengthy, so you can pretty much still move all around your room without a problem. Mostly all the cords are like this, so there should be no problem and some cords included just serve the purpose of extending a cord already in the system if it needs to go a longer way around your room.
Once you have the wiring all set up and worked into the rest of the spaghetti found behind your desk, it is time to attach the BK. The BK is designed to fit around the metal post of traditional computer chairs. Almost every single computer chair out there has this metal post built into it. If you have a different type of chair, or not even what is considered a computer chair at all, you will probably have major issues trying to attach it to anything else. You will need to raise the chair and pull down the plastic part that usually covers the metal post. Then simply open the clamp on the BK and attach it to the post. Once it is attached there is a twisty bar that acts like a bolt and then a knob that will be used to put the final tightness on the attachment so this thing doesn’t fly off and do some real damage to something. (Honestly though, it attaches great and even if you were dumb enough to leave it extremely loose it could really only damage the bottom of your chair if it happened to fall off)
Since the ButtKicker is marketed toward gamers, it looks almost like designs you see on consoles like the Xbox. The amplifier has neat ridges on the side and on the top that are accented with silver paint. The amplifier looks rigid and tough and on the front it has a nice looking display. The front also contains the BK Gamer logo, two knobs, two buttons, three LED displays, and a number of texts describing the controls. This amplifier looks great next to any game system, especially the Xbox, and mostly any TV (since most are made out of the same looking black plastic). It is a shame that the BK has to be hidden underneath your chair because it truly looks amazing. The drum part that contains the motor has ridges in it and a red top and bottom, with neat silver accents on the top as well. This drum is attached to an arm, or guarder type thing, which then attaches to the clamp. The guarder has the ButtKicker Gamer logo right on it and it is not just some cheap spray paint to make it look pretty. It’s shiny, silver and red, which looks excellent in the middle of the device. The other end of the BK contains the clamp which has a nice little red knob at the end. Attached to the drum part is the cord that comes out of the bottom. With a few Velcro straps that are included you can easily attach this cord to your chair so it won’t always be in the way. However, often times you will probably end up running over the cord, and it getting tangled up somehow. Although it doesn’t happen often, unless you are extremely careful it might frustrate you a time or two. As stated above, this cord is then attached to the extension cord that plugs into the back of the amplifier.
Finally, on to the most important part of the product, the performance, and of course… it passes with flying colors! The main volume control on the amp will probably never have to go more than half way up to show how powerful this thing actually is. But if you really want to rattle your seat feel free to crank it up and almost be rattled completely our of your computer chair. Besides the volume control, you can also control the Low Filter and High Cutoff. The amp included in the box is a 100 watt that gives the BK plenty of power. The only downsides about the amplifier is that it has a fan in it so it will be buzzing probably just as loud as a normal computer, and it is somewhat large and will need a good amount of space (about 13″ by 9″) on your desk or wherever you want to put it.
One other small issue is with background music in games. If the game has somewhat loud background music, the BK will react to it and if the background music is ongoing your seat will always be rumbling. Since it is always rumbling, when something dramatic happens it usually gets mixed in with the other rumbles of the background music and is less dramatic. Although, this is not a huge issue and only happens with a few games. Other than those few points, the performance of the BK is truly amazing and you will be surprised at how much more realism it adds to any game.
Overall, the ButtKicker Gameris an extremely unique product that works well. With the 100 Watt amp and the 250Hz ButtKicker, this thing is sure to give you a huge shock should a grenade or something explode in your game. The device reacts extremely well to the music and when playing music you can even hear the beat of it if you have your speakers or TV turned off. The overall look, quality, and performance is well worth your buck. Without a doubt, this is truly a “kick ass” gaming product!